Project Overview
Information Products
Commodities
- Fruits: apples
Practices
- Pest Management: integrated pest management
Summary:
Problem and Proposed Solution
With increasingly erratic weather patterns and more periods of heavy rain, it is difficult to get into the orchard early enough in growing season for effective scab management. Scab is the primary fungal disease of apples and it requires intensive management early in the growing season: first with a tractor and flail mower to pulverize prunings and then second, to get into the orchard with a tractor and an airblast sprayer to apply copper, an organic fungicide. Using a drone to apply copper in dormant conditions eliminates the need to take a tractor through the orchard in wet, early spring conditions thereby minimizing soil compaction, erosion, and general deterioration.
The potential benefits of using a drone for orchard crop management can be taken further into the growing season as well:
-
Further reducing soil deterioration by avoiding tractor and sprayer use,
-
Reducing the use of non-renewable fuel sources
-
Reducing the volume of insecticides used on the farm
-
Decreasing the time it takes for pesticide applications
Research Approach
The project assessed spray height, spacing, and material types toward the purpose of being able to specify best practices in using a drone for orchard management. After determining the suitability of different material types, we designated which orchard-specific products are suitable in orchard production.
To assess spray efficacy we hung spray pattern test paper at twelve points within each of two spray areas:
-
at the four corners;
-
at four points in the middle of border rows;
-
at four equidistant points in the middle of the orchard block
Each point will have three spray pattern test papers:
-
at low branches approximately three feet from the ground;
-
at middle branches approximately six feet from the ground;
-
and at upper branches approximately nine feet from the ground.
Research Conclusions
After spraying 8 gallons per acre at different spacings and heights above the trees, we found that each condition provided suitable coverage based on the spray pattern paper with the exception spray area perimeters. The issue with the perimeter had more to do with wind speed and direction than spray volume or height.
We also determined which pesticides commonly used by apple growers were approved for aerial application and what their formulations were -- dry or liquid -- since dry pesticides tended to clog nozzles and hoses in the drone. Those pesticides and their characteristics are summarized in a table at the end of the adjoining report.
Farmer Adoption Actions
Drone spraying appears to be a feasible option, though low spray tank volume and brief battery life present significant obstacles. Assuming that drone spraying is as effective as tractor spraying, choosing which approach depends on other factors like orchard size, row length, row orientation, elevation challenges, and wet ground.
Project objectives:
Objectives
Determine optimal spray heights for central leader and tall spindle orchards for management with a spray drone.
Spray heights of 12' and 16' feet merited relatively equal results.
Determine which material types are best suited for application with spray drones.
Liquid materials are easier to use in a drone since drones do not include agitation like airblast sprayers traditionally used in orchard management.
Help growers determine if management via drone is the right choice for their orchards.
We developed a series of questions for orchardists to address when considering using a drone in their orchards.
Develop guidance orchardists can use for orchard management via drone.
We developed a report that summarized guidance for orchard management via drone.